Declaration of Conformity
CE-Conformity
This product has been developed and manufactured in accordance with the
current European standards and guidelines.
Note: A Declaration of Conformity can be requested separately.
General
The Inclination Sensor 6220312 is an instrument used to control the inclination
angle of a reference axis.
The product should be examined for any possible damage that may have
occurred during transportation. Should any damage have occurred, please
contact the transportation company or 2E mechatronic without delay.
Read the instructions carefully. Familiarize yourself with the device before as-
sembling, installing and operating.
The following assembly and operation instructions have been carefully drafted,
however, it is not possible to cover every conceivable eventuality. Therefore, if
you have any queries regarding the product or its application we can be con-
tacted at our internet address (www.2E-mechatronic.de) or one of our contact
personnel for further information.
The Sensor should be operated and installed in accordance with the instruc-
tions given in order to guarantee that the device and the connected systems
operate safely.
The safety of operating personnel can only be guaranteed when the device is
used for the purpose which it was intended for.
Furthermore the national regulations are to be followed. (e.g. VDE0100)
Only shielded cables have to be used for connecting the device.
Page 2 | Instruction Manual 6220312 | 2E mechatronic
Page 3 | Instruction Manual 6220312 | 2E mechatronic
Page 4 | Instruction Manual 6220312 | 2E mechatronic
