2E GAMING RUNA, Operation Manual

Page: 19 / 26

19
EN
OPERATING CONDITIONS AND PRECAUTIONS
1) Ensure that you have all the necessary parts before start to use case.
2) It`s important to use gloves during assembling and prevent injures of your hands.
3) Don`t use additional efforts when you fix components to prevent damage of case or case
mounting.
4) Make sure that all components of the product are intact and functioning properly.
5) Do not use abrasive, whitening cleaners to clean the product to avoid scratches and surface
damage.
6) Store and operate out of the reach of children and pets.
STORAGE, TRANSPORTATION AND UTILISATION
1) Transportation of product in original packing to avoid damages.
2) If components are already were installed in cases, please check how securely they are fixed
or remove it before preparation of case for transportation.
3) Avoid contact with moisture or water on the surface or inside of case to prevent corrosion
of material.
4) Utilization of case and it`s packing in accordance with utilization regulations in your country.
10 – Fan connection and synchronization with ARGB tape.
Fan with connectors included:
(1) MOLEX - for power connection.
(2) 3 pin (closed) - for connecting an additional fan.
(3) 3pin - for connecting to ARGB tape.
Fan is connected to ARGB tape as standard: (3) 3pin fan to 3 pin ARGB tape.
Additionally, if necessary, you can use (2) 3 pin (closed) to connect an additional fan and 3 pin
ARGB + 5V with ARGB tape to connect and synchronize with the motherboard.
Before connecting, it is important to make sure that the connectors match the above
mentioned connectors.
If the fan is connected to an ARGB tape, the backlight is synchronized and you can change the
color using the button on the input panel, or turn off the backlight. To do this, you need to
hold the button in the on position for a few seconds.
Подключение вентилятора и синхронизация с ARGB лентой.
В комплекте вентилятор с коннекторами:
(1) MOLEX - для подключения питания
(2) 3 pin (закрытый) - для подключения дополнительного вентилятора
(3) 3pin - для подключения к ARGB ленте
В стандартной комплектации вентилятор подсоединен к ARGB ленте: (3) 3pin вентилятор к 3 pin ARGB ле
Дополнительно, если есть необходимость, можно использовать (2) 3 pin (закрытый) для подключения
дополнительного вентилятора и 3 pin ARGB +5V с ARGB ленты для подключения и синхронизации с
Перед подключением важно убедиться в том, что разъемы подходят к вышеобозначенным
коннекторам.
Если вентилятор подсоединен к ARGB ленте - подсветка синхронизируется и можно изменить цвет при
помощи кнопки на панели ввода, либо отключить подсветку. Для этого необходимо задержать кнопку
во включенном положении несколько секунд.
+5V 3PIN RGB
(2)
M
ole
x
(3)
(1)