2E GAMING 2E-MGHSL-WL-BK, User Manual

Page: 14 / 20

14
EN
SIZE:
100*135mm
Function layout
2E GAMING
HYPER SPEED MOUSE
LITE WL
0
Left click
@
Right click
8
Middle click
9
Fo「ward
0
Backward
(3
DPI
Quick Start Guide
@
＠
＠
＠
e
@
@
0
@
Powe「 on with RGB Led on
Powe「 on with LOGO on
Power Off
Pol ling Rate
Polling rate LED
Wired and charging Type-C
Mouse Instructions:
1. remove the USB Nano receiver
2. Plug the receiver into your computer USB port
3. Turn on the mouse by switching on the power switch at the bottom of the mouse
4. Wait for the computer installation to finish
DPI setting and Indicator:
1. Default DPI levels:
800−1200−1600−3200−4000−7500
DPI levls
2. Press the DPI button on the top of the mouse to cycle through the DPI levels
3. The mouse scroll wheel LED color indicates the DPI level
BOODPl: Red Color Breathing, 1200DPl: Y ellow Color Breathing(default),
1600
DPl:Green Color Breathing, 3200DPl: Purple Color Breathing,
4000DPl:
Bl
ue Color
B
reathing, 7500 DPl:
B
lue ness Color Breathing,
Note:
1. DPI levels can be adjusted by the software. Max DPI is 10000DPI
2. DPI LED effects can be adjusted or turned off to save power by the software
Polling Rate:
125-250-500-1 OOOHz can be set by the software. Default polling rate is 500Hz
Polling rate LED color:
125 red color, 250 blue color, 500 green color, 1000 purple color
Power switch function:
1. Switch at Position 7 : Turns on the mouse with RGB LED on
2. Switch at Position 8 : Turns on the mouse power with RGB LOGO on
3. Switch at Postion 9: Turns off the mouse
**Note•• If you want to turn on the LED in wired mode, you will need to turn on the LED in
wireless mode first
Wired and wireless function:
1. Wired and Wireless modes switch automatically. Simply plug the USB nano receiver into
the computer without connecting the cable and the mouse will work in wireless mode
2. lf you connect the USB-C cable from the computer to the mouse, the mouse will
switch to wired gaming mode automatically
Low power and charging indication
1. Low power indicator: The mouse 's scroll wheel will blink red to indicate that the
battery's power is low (10%) and you should recharge your mouse's batter by connecting it
to the PC via the charging cable
2. When charging, the scroll wheel LED will blink orange. Once the battery is fully charged,
the LED will turn a solid green.
Pairing
1. lf your mouse loses wireless connection, you can re-pair the mouse with the receiver by
following these steps:
Hold down the left middle right button for 3 seconds until the scroll
wheel flashes yellow
2. Release all the buttons, put the mouse close to the receiver then unplug the receiver and
replug the receiver back into the usb port.
The LED will stop flashing after the pairing is complete.
Main Specification
Size:
Weight
Switch
Sensor
Max DPI
122.8X70.4X39.5mm
80g
HUNAO 20M
PAW
3325
10000
Default DPI.
800-1200-1600-3200-4000-7500 DPI
IPS
Accele「ation
Polling rate
Interface
10Olps
20g(Max)
125-250-500(default)-1 ODO Hz
USB 2.0
Battery type
Battery capacity
Default working time(1 time charge)
Li-ion Polymer Battery
SOOmAh
around 40h(SOOHz)
Charging lime around 1.5 h
FUNCTION LAYOUT
① Left click
② Right click
③ Middle click
④ Middle click
⑤ Backward
⑥ DPI ⑦ Power on with RGB Led on
⑧ Power on with LOGO on
⑨ Power Off
⑩ Polling Rate
⑪ Polling rate LED
⑫ Wired and charging Type-C
Equipment:
Хх хх х х х х
User manual