247Security Inc. | 4400 North Point Parkway, Suite # 158, Alpharetta, GA 30022, USA | 1-866-693-7492 | www.247securityinc.com
mDVR303
USERS MANUAL
17
3.1.3
ERROR LED
This LED is to notify operator that the system has encountered a problem and cannot continue normal operation
when lit solid. Please call tech support for troubleshooting procedures. If the LED is flashing once about every five
seconds, the feature notifying you of a marked event has been checked in the system tab of the set-up menu.
3.1.4.
VIDEO LOST INDICATOR LED
This LED is to notify operator when any of the enabled cameras loses video signal meaning the cable is cut, not
connected or the camera is having a problem.
3.1.5. RECORD LED
This LED indicates if the DVR is recording.
3.2.
HDD ON/OFF LOCK
The HDD On/Off lock mechanism is employed to prevent unauthorized operators from removing the media
storage and tampering with video data. Turn key to position “Close” to lock media storage or “Open” to unlock. The
mDVR303 will NOT record video if the lock mechanism is in the “Open” position
3.3.
MEDIA STORAGE REMOVAL
The media storage is hot swappable and can be removed and inserted without turning the ignition of the vehicle
off. This process will take roughly 10 to 20 seconds to complete. The feature is helpful when access to video is
needed but vehicle is still running its’ route. User can remove the media storage and insert a new one so that the
needed video can be retrieved right away.
1.
Turn key to the “Open” position
This process is necessary so that the mDVR303 can properly close all video/audio files and safely turn the
HDD power off. Open the door and wait until only the ignition light is still light before removing the media.
2.
Gently pull media storage out from the bay
3.
Insert new media storage – Wait for at least 30 seconds (Power LED is OFF) then insert new/original
storage media, close the door.
4.
Turn key to the “Close” or locked position
The mDVR303 will now turn the HDD power on, detect the new media and start recording again.
3.4.
WIRELESS VIDEO RETRIEVAL
(Refer to SmartServer manual) Although the 303 does not have built in WIFI capability, the DVR can still
be made WIFI ready with the use of an external WIFI bridge available for purchase separately.
3.5.
EVENT MARKING AND RETRIEVAL
(Refer to Event Marking/USB Retrieval guide)
