background image

2

Safety & Warnings

Improper installation or use of the YOWIE roof top tent may result in serious injury or death. 

Follow these installation instructions carefully to ensure proper installation to vehicle and safe use 

of the roof top tent. 

Note: 

Alterations and / or inclusions such as roof racks and roof top tents applied to the vehicle 

roof may affect vehicle handling and characteristics.

The manufacturer (23ZERO) disclaims all responsibility in case of accidents and / or damage due 

to installation of a roof top tent to an underrated roof rack, improper use, improper maintenance 

or checking the tightness of the brackets regarding the installation of the roof rack system.

Inspections:

 Roof top tents have many moving parts, so maintenance checks are always advised. 

During trips regularly check that all nuts and bolts attaching the roof top tent to the vehicle as well 

as hinges and locks are tight and in good repair.

Ladder:

 For your safety and protection, ensure correct placement and angle of ladder. 

Recommended ladder placement is a 4:1 ratio or approx. 75°.

Ladder height may need to be adjusted depending on vehicle height, see “Ladder Adjustment”

DO NOT CLIMB ON LADDER UNTIL CORRECT ANGLE IS ACHIEVED

23Zero - The wholesaler / manufacturer shall not be liable for special, indirect incidental or 

consequential damages.

YOWIE USER MANUAL

Summary of Contents for ABS HARDSHELL

















Reviews: