1More Fit SE S30, User Manual

Page: 9 / 40

FAQ
1. Why the headphones cannot be turned on?
Check if your headphones have enough battery life. If not, please charge them for at least 30 minutes.
2. Why the headphones cannot connect to my cellphone, or take a long time to connect?
1) If headphones cannot pair normally when power on. Open the case, triple tap the pairing button to initial
searching for Left & Right pairing, and then click "1MORE Fit SE" in the device pairing list.
2) To pair the headphones to a new device, simply place them into the charging case and triple tap the pairing
button. Then click "1MORE Fit SE" in the new device pairing list to connect.
3. Why the headphones cannot play music after successfully connecting to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your device name
and make sure the "Media Audio" option is on.
4. Why there is no sound from the headphones while making phone calls after successfully connecting to my
Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your device name
and make sure the "Phone Audio" option is on.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable
exposure condition without restriction Federal Communication Commission (FCC) Radiation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐ Consult the dealer or an experienced radio/TV technician for help.
EN