EN
DE
FR
ES
IT
EN
DE
FR
ES
IT
2
3
Installation Guide
Fit
Fit
Does Not Fit
Does Not Fit
Seat
Seat
Seat
1. Remove the toilet
seat by unscrewing the
two back screws.
2. Place the bidet on
the toilet. Align the
seat coupling holes
with the back screw
holes.
3. Screw the seat back
onto the toilet bowl,
threading the screws
through the seat
coupling holes.
Home Flexible Hose
Valve
(Cold Water)
4. Shut off the water supply and then disconnect the home flexible hose
from the water supply.
Adapter
Adapter
Adapter
Water Supply
Home Flexible Hose
Stainless Steel Hose
5. Connect the adapter
to the water supply
valve.
6. Connect the home
flexible hose to the
adapter.
7. Connect the
stainless steel hose to
the adapter.
Stainless Steel Hose
Water Inlet
8. Connect the other end of the
stainless steel hose to the bidet’s
cold water inlet.
IMPORTANT: All connections
must be tight to prevent water
leakage. If any leaking occurs, turn
off the water supply and unscrew
the connections. Wait until the
connections are dry and screw
together tightly again.
