1byone JPD-FR401 Instruction Manual Download

Page: 2 / 20

Introduction

Thank you for choosing 1byone infrared thermometer. This infrared thermometer tests body

temperature by measuring the ear and forehead, making it suitable for both adults and children

(noting that ear test mode is only suitable for children over 3 months). Please read the instruction

manual carefully and keep it for future reference.

1. Necessary Safety Instructions

The device is not suitable for newborn babies.

The device is not suitable for continuous monitoring.

The device is not waterproof. Please do not douse with water or other liquids. Cleaning and

disinfecting procedures should comply with the instructions specified in the Cleaning and

Disinfection section.

Please DO NOT use this device if the sensor or other product part has been damaged. DO NOT try

repairing this device yourself. Please seek the help of a qualified professional.

This device consists of precision, high-quality parts. Please do not drop this device.

Protect the device against possible severe shocks or vibrations. DO NOT try forcing apart this device.

Summary of Contents for JPD-FR401





















Search results

Summary of Contents for JPD-FR401

Reviews:

Related manuals for JPD-FR401

Brands by name

Popular brands

1byone JPD-FR401, Instruction Manual

Search results

Summary of Contents for JPD-FR401

Reviews:

Related manuals for JPD-FR401

Brands by name

Popular brands