background image

5. Trouble Shooting:

a.  The receiver rings without the push button 

being pressed. 

   The receiver may be matching on the same 

frequency with nearby push buttons. You 
should reset the pairing and re-pair your push 
button(s).

b. There is no ring/LED flash when the push 

button is pressed. 

·

Check whether the battery (CR2032) is 
inserted into the push button.

·

Check whether the power outlet being used 
for the receiver is working properly.

·

Pair the receiver and push button again.

c.  The ringtone volume is greatly reduced. 
    A weak battery can reduce the ringtone 

volume. Change the battery every 10-12 
months for the push button.

   Metal constructions, walls, and other 

appliances with the same frequency can also 
affect the receiver’s ringing. Avoid mounting 
the push button and receiver near any metal 
objects. 

Disposal of the appliance

Under no circumstances should you 
dispose of the appliance in normal 
domestic waste. This product is 
subject to the provisions of European 
Directive 2012/19/EU.

Dispose of the appliance via an approved 
disposal company or your municipal waste 
facility. Please observe the currently applicable 
regulations. Please contact your waste disposal 
centre if you need any further information.  

Disposal

- 09 -

- 10 -

Summary of Contents for Easy Chime OUKQH-0761








Reviews: