EN
DE
FR
ES
IT
EN
DE
FR
ES
IT
1. Connect the string lights to the controller box and connect the
controller box to the power adapter.
2. Bend, shape, or hang the lights before plugging the power adapter
into a power outlet of the correct voltage.
3. Turn the lights on and use the remote control to set the lightning
mode that best fits your needs.
How to use
1. Can I plug one string light into the end of another string light?
No, the string lights cannot be plugged end to end.
2. My lights are not working even after I have followed all the "How
to use" steps.
Check that each connection is secure and that it is plugged into an
outlet of the correct voltage.
3. The lights are not responding when I select the
Flash/Strobe/Smooth modes.
There is the possibility the frequency of each cycle is too slow.
Increase the speed of each cycle by pressing the up arrow button.
4. How do I change the brightness level of the lights in the
Flash/Strobe/Smooth modes?
To adjust the brightness in any of these modes:
1. Clear the mode by pressing the “Clear”button.
2. Adjust the brightness level by selecting one of the number
buttons. You can set the level between 10 to 100 percent.
3. Choose the mode you want to use by pressing the respective
mode button.
5. How do I change the speed of the Flash/Strobe/Smooth modes?
For the Flash mode, use the 1 Hz, 2 Hz, and 3 Hz buttons to adjust
flashing speeds.
For the Smooth mode, use the 5s to 20s smooth buttons to adjust
the fade in/out intervals.
For all modes, the up and down arrow buttons can be used to fine
tune the speeds of each mode.
FAQ and solutions
Power on/off
Flash Mode
The light will flash at constant speed.
1 HZ, 2 HZ, and 3 HZ are the flashing speed.
In fade mode, this sets the time for a complete
cycle, e.g. 10s means the light will fade in and out
once every 10 seconds.
In Flashing/Strobe/Fade mode, press these up
and down buttons to increase/decrease the
flash/strobe/fade speed.
Brightness Setting
“100” means 100 percent brightness and “10”
means 10 percent brightness.
Strobe Mode
The light will flash in a strobe pattern.
Fade Mode
The light will gradually fade in and out.
Clear all flash/strobe/fade settings and return to
100% brightness.
to
OFF
ON
to
100
10
Smooth
10S
5S
Clear
1Hz
Flash
2Hz
Flash
3Hz
Flash
FF
04
05
