05
06
·
Place switch at “ON” to have the appliance
permanently switched on.
·
When it gets dark early, set switch to
“DUSK+7HRS“.The appliance becomes active at dusk
and, for 7 hours, simulates the bickering of a television.
After 7 hours the appliance switches itself off. As soon
as it is dusk again, the appliance switches back on for
7 hours.
·
Set the switch to “DUSK+4HRS“.The appliance
becomes active at dusk and for 4 hours, simulates the
bickering of a television. After 4 hours the appliance
switches itself off. As soon as it is dusk again, the
appliance switches back on for 4 hours.
·
To switch your appliance off again, you need to slide
switch to the position "OFF".
·
Place the appliance on a flat surface so that it is stable
and secure.
·
Drill two holes with a spacing of about 50 mm. Use the
stand to mark the holes: the spacing will thus be
measured correctly. The boreholes must be suitable for 6
mm wall plugs.
·
Insert the supplied plugs into the holes and screw the
stand down through the holes
·
Align the light surface so that the flicker is visible on the
walls and/or ceiling
·
Connect the power adapter with the appliance by
inserting the barrel connector into the DC socket at the
rear side of the appliance.
Note:
In the case of exposure to light (> ca. 30 lux) the TV Simulator
also switches off before the 4 or 7 hours have lapsed.
Note:
1)The TV Simulator may not be located near a window which
could be well lit from outdoors, such as on a busy street or
next to street lights.
0
ON
OFF
DUSK+4HRS
DUSK+7HRS
1
Operation
Setup:
EN
DE
FR
ES
IT
EN
DE
FR
ES
IT
