After inserting the batteries (3 x AAA
batteries), turn on the door stopper
alarm by sliding the ON /OFF switch
to the ON position.
Place the door stopper alarm at the
foot of the door. When the door is
opened, the door will squeeze the
sensing surface of the alarm and
activate the alarm. Then the alarm
will play a high alarm sound to notify
the host. The alarm will sound for 30
seconds when pressure is applied to
the sensing surface of the door
stopper, and stop after 30 seconds if
pressure has been released.
Low voltage indication: When the
batteries are exhausted, the LED
4. Operation and Installation:
3x1.5V AA
Alkaline Battery
Battery
compartment
cover
indicator on alarm will flash once
every second reminding you to
replace the batteries.
Safety note:
·
The alarm is powered by 3 x AAA
batteries. When exhausted,replace
them using the same type and
voltage batteries.
·
Always insert the batteries using
the correct polarity to eliminate
the danger of fire.
·
Keep old and new batteries away
from children.
·
Old batteries should be properly
disposed using safe environmental
practices.
·
Remove the batteries from the
alarm if the alarm is not to be used
for an extended period of time.
- 03 -
- 04 -
