1320 Electronics LLC ALDL Bluetooth Adapter
User’s Guide
Installing the 'ALDL Bluetooth adapter'
1. Connect the power connector to the
'ALDL Bluetooth adapter'
.
2. Verify that either terminal ‘E’ or ‘M’ on your vehicle’s ALDL connector contains a metal contact, not
both. If both contain a metal contact, contact
1320 Electronics
for a special Adapter. (Pin ‘E’ is the 160
baud data connection. Pin 'M' is the 8192 baud connection. Both should not contain a contact!)
3. Connect the
'ALDL Bluetooth adapter'
to the ALDL connector on the vehicle. The ALDL connector is
typically located on the bottom of the dashboard in the driver's side foot well.
4. Configure switches per instructions on the next page,
Operating the ‘ALDL Bluetooth Adapter’
.
Switch configuration is only checked at power up by the ‘
ALDL Bluetooth Adapter’
.
5. Connect the
'ALDL Bluetooth adapter'
power cable to the cigarette lighter/utility power connector
inside the vehicle.
6. Safely stow the
'ALDL Bluetooth adapter'
and associated cables where they will not interfere with
the driver's ability to operate the vehicle.
