Quick Start Guide
12
To send a document to
Zignature
Pad, open it in a Windows application (ex. DOC
file in Microsoft Word), select Print option, select 10ZiG
Zignature
Pad printer from
list of available printers, click Properties button and review document properties. Pay
attention that the paper size is 10ZiG VPort and resolution is 100x100 DPI. Click
Print (or OK). After few seconds the document will appear in the
Zignature
Pad
screen.
How to use the Digital Pen
Installing/Replacing Pen Batteries
1. Remove the battery compartment cover.
2. Install two SR41 batteries, with the positive “+” facing up.
3. Replace battery compartment cover.
Write Correctly!
When you pick up the pen, find a position that is comfortable for you.
Be careful to hold the pen in a way that does not block the signals sent from the tip
of the pen to the sensors receivers. When writing make sure to apply enough
pressure to activate the pen head.
Warning:
Do not attempt to open the Digital Pen. This may cause pen
malfunction.
Uninstalling the Software
Suite
To uninstall the drivers and all software: component:
1. Disconnect the
Zignature
Pad from the computer.
2. Select Start > Settings > Control Panel > Add or Remove Programs.
Summary of Contents for Zignature Pad-1410
Page 1: ...Quick Start Guide 1 ...
Page 2: ...Quick Start Guide 2 ...
