- 27 -
Set up the printer where you will print documents:
1.
Select the
Quick Print Document
tab.
2.
Select a printer driver from the list (not 10ZiG Zignature Pad) and a paper type.
3.
Select a print resolution (default: 300x300 dpi). This is the recommended resolution.
4.
Determine how many copies to print.
5.
Click
Apply
.
Printing if No Zignature Pad Attached
If the Zignature Pad is temporarily unavailable, you can configure VPort to automatically
print out your document:
1.
Select the
VPort Agent
tab, and select
Print document if tablet is not available.
2.
Click
Apply
.
Changing the Print Resolution and Paper Size
The default print settings are
Resolution: 100x100 dots per inch
Paper width: 8 inches
Paper height: 11.32 inches
A resolution of 100x100 dpi is the fastest for processing a document.
You can change these default settings in the
VPrint configuration
tab. For example, for high
print quality, select 300x300 dots per inch.
NOTE
: To improve the quality of printing signed PDF documents, in Adobe Reader, click
File
> Print > Advanced
, select
Print As Image
and click
OK
. If the quality is still not good, change
the print resolution to 300x300 dpi.
Printing Automatically
By default, VPort does not automatically print the documents on paper once they are
processed. To change this:
1.
In the
VPort Agent
tab, select
Auto-print after signing
.
2.
Click
Apply
.
Now, when you have finished with the document on the Zignature Pad, once you click the
green check mark
at the bottom of the Zignature Pad, the document prints
automatically.
If you get an error message when trying to print a signed document, you can
Sharing Zignature Pad as a Network Print Device
You can print a document from a remote computer and display it on the Zignature Pad and
your workstation’s Document Monitor for signing. Configure as follows:
On the host:
1.
Install VPort Zignature Pad software on a Windows XP/7 machine.
Summary of Contents for ZiGnature Pad 1400
Page 1: ... i ...
