P. 116
nanobox | tangerine User Manual
Dec 11, 2023
Global MIDI Settings
The tangerine’s nanobox Configuration page includes a set of
global parameters that determine the state of MIDI-related
features and the MIDI channels that it associates with
features that are not preset-specific. The table below explains
these settings.
MIDI-Related Global Parameters (nanobox Configuration
page)
Pad
Parameter
Description
Supported Values
MIDI GlobIn
Specifies the MIDI channel a MIDI
controller must use to trigger each pad
with a specific key, or to send MIDI data
that can be used for modulating the FX1
Delay and FX2 Reverb effects.
MIDI GlobIn has no impact on playing
individual pads over specific MIDI
channels.
None
1-16 = Receive MIDI Note and
Continuous Controller
messages on the specified
channel.
Omni = Receive MIDI note
messages on any MIDI
Channel, excluding MIDI
channels that are assigned as
a Pad’s MIDI In channel.
MIDI CC In
Specifies the MIDI channel for controlling
the configuration parameters of individual
Pads.
None
1-16 = Receive MIDI continuous
controller messages on the
specified channel.
MIDI
ProgChg
Specifies if the Tangerine responds to MIDI
Program Changes by loading presets.
The tangerine does not use preset
numbers, so it interprets MIDI program
numbers (0-127) as positions in the list of
presets, in alphabetical order.
On = Respond to Program
change messages
Off = Ignore Program Change
messages
MIDI Thru
Specifies if the tangerine passes MIDI
messages it receives on its MIDI input
through to its MIDI output.
On, Off
MIDI ClkRcv
Specifies if the tangerine uses an external
MIDI clock instead of its internal clock.
On, Off
