background image

you tips on training and nutrition.

 

 

Please read the instructions carefully before you start the assembly!

 

 

When tightening the screw connections, make sure that the movement is not affected by 
excessive tightening.

 

Movable gel parts ( plain bearings, etc. ) must be greased from time to time with 
standard lubricating grease.

 

 

•  Install the device according to the instructions for use and use only the device-specific parts 

enclosed with the device. Before assembly, check the completeness of the delivery using the 
parts list in the assembly and operating instructions.

 

•  Place the unit in a dry, level place and protect it from moisture. If you want to protect the 

installation site especially against pressure points, dirt or the like, we recommend that you 
place a suitable, non-slip support underneath the unit.

 

•  In general, sports equipment is not a toy. They may therefore only be used according to the 

regulations and by appropriately informed or instructed persons.

 

•  If you experience dizziness, nausea, chest pain, or other abnormal symptoms, stop 

training and consult immediately your doctor.

 

•  Persons such as children, disabled persons and disabled persons should only use the 

appliance in the presence of another person, who can provide help and guidance.

 

•  Make sure that you and other persons never move with any parts of the body into the area 

of moving parts.

 

•  When adjusting adjustable parts, observe the correct position or the marked, maximum 

adjustment position

 

•  Never train immediately after meals!

 

•  Inspect the unit for loose components before each use.

 

•  Only place the unit on stable surfaces

 

•  Do not use the appliance if you weight more than 100 kg

 

 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for 50T

















Reviews: