TOWER SYSTEM LCC44/LCC84 WALL INSTALLATION
Figure 11. Positioning the bracket and aligning the
mounting holes.
•
Place the bracket over the rear of the enclosure, aligning the
two mounting holes in the bracket with the threaded holes in
the connection panels. Be sure to orient the bracket with the
attachment for the wall-mount plate towards the end of the
enclosure that will be on the bottom when it is installed.
Figure 12. Inserting the lower screw through the
bracket.
•
Insert one of the M8 x 20 mm screws previously removed, and
thread it into the bottom (toward floor) panel of the enclosure
through the mounting hole in the bracket.
Figure 13. Inserting the upper screw through the
bracket.
•
The upper end of the bracket can be secured using the second
M8 x 20 mm screw previously removed. Insert the screw and
thread it into the top (toward ceiling) panel of the enclosure
through the upper mounting hole in the bracket.
Figure 14. Tightening the screws to fix the
mounting bracket (LCC44 shown).
•
Using a 5 mm hex wrench (Allen type) with a length that allows
for sufficient leverage, firmly tighten the screws into the panels,
making sure that their can be no movement between the bracket
and the speaker enclosure.
