19
5. Connect the wire leads to the new cartridge’s terminals .The wire lead color codes
are as below:
Wire
Channel
White
Left channel positive (L+)
Black
Left channel negative (L–)
Red
Right channel positive (R+)
Black
Right channel negative (R-)
6. Adjust the cartridge’s position to make sure it is precisely aligned on the headshell
so that the stylus will be appropriately tracking within the grooves.
To achieve this, place the included paper
cartridge alignment protractor
over the
turntable spindle, carefully lift the tone arm, and place the tip of the stylus on the
points marked 130mm and 250mm respectively. Fine tune the cartridge’s position
on the headshell until the cartridge is perfectly in parallel with the reference lines at
both points.
7. Tighten the screws completely once perfect alignment is achieved.
NOTE:
If you are unfamiliar or uncomfortable with completing this procedure, we
recommend consulting with a professional to perform the installation.
When the Turntable is Moved
Using the product's original packing materials, wrap the turntable in the reverse order
from when you unwrapped it. If you do not have the packaging materials, take the
following measures:
• After disconnecting the AC adapter from the outlet, remove the felt mat and platter,
and then wrap them so that they do not get damaged.
• Attach the protector to the cartridge.
• Use a string or something similar to tie the tonearm to the rest so that it does not
become dislodged.
• Wrap the turntable body with paper or a soft cloth so that it does not get damaged.
