Online Services
DKC-850 INTERNET CONNECTION GUIDE
Connection Example
With Router Function
Without Router Function
Modem (with router function)
Modem (without router function)
Router/hub
Other device (such as computer)
LAN cable
I/O Center (right side)
Instructions
ATTACH
ETHERNET CABLE
To your modem or
router
To set up the connection, attach one end of the Ethernet cable to a
free port on your modem or router.
ATTACH
ETHERNET CABLE
To your Disklavier
Attach the other end of the cable to the Ethernet port on your
Disklavier. The location of the port is shown here.
PRESS
Press the [Internet] button. Congratulations, you are now
connnected. You should see the Internet Direct Connection home
page.
Still can't connect? Follow these instructions…
PRESS
If you see a screen saying that you are not successfully connected,
you may need to set up your instrument to connect to your
network. To do so, press [Setup], then [Network] from your remote
control.
On the network screen, you can update your DHCP, DNS, Proxy and
manual IP settings. In most cases you will not need to edit these
settings.
Unless you are manually assigning DNS or IP locations for your
6/4/2011
Yamaha: Connect to Radio Service For …
…yamaha.com/connect.html?type=radi…
1/2
