PN59021-TH/PN59023-TH
PN59021-MY/PN59023-MY
PN59021-ID/PN59023-ID
PN59021-SG/PN59023-SG
PN59021-NZ/PN59023-NZ
Model No.
10GBASE-LR SFP+ Module (SFP+10GLR)
10GBASE-SR SFP+ Module
10GBASE-LR SFP+ Module
PN59021
PN59023
IEEE802.3ae
10GBASE-SR
IEEE802.3ae
10GBASE-LR
SFF-8472 (Diagnostic Monitoring Interface)
850 nm
1310 nm
DC 3.3 V
0 to 50°C /20 to 80% RH (No dew condensation)
10GBASE-SR SFP+ Module (SFP+10GSR)
Installation Guide
Thank you for purchasing our product.
This document provides important information about safe and proper
operations of this SFP+ Module.
Please read the
"Important Safety Instructions"
.
Any problems or damages resulting from disassembly
of this SFP+ Module by customers are not covered by
the warranty.
The instruction guide can be downloaded from the
following URL.
https://panasonic.co.jp/ew/pewnw/english/datadownload/index.html
C1214-20122 Printed in Japan
Product Outline
Specifications
Product name
Module No.
Standards
Compatible cable
Optical wavelength
Operating voltage
Power consumption
Operating ambient
temperature/humidity
Fiber optic port
connector type
Accessories
MMF cable
LC connector (Duplex)
SMF cable
1.0 W max
1.25 W max
External dimensions
Mass (Weight)
17 g
9 mm (Height) x 14 mm (Width) x 57 mm (Depth)
(Excluding protruding sections)
Installation Guide (this document)
x 1(*)
*
Just the PN59021-TH/PN59023-TH has 1 Installation Guide in
Thai (at total of 2 guides)
Protection cap of the fiber optic port (Attached to the module) x 1
10GBASE-SR SFP+ Module and 10GBASE-LR SFP+ Module are SFP (Small Form-Factor
Pluggable) modules to be connected to a Panasonic Ethernet Switch’s SFP+ extension
slot.
MMF: Multi Mode Fiber SMF: Single Mode Fiber
1. Securely connect the SFP+ Module to the
SFP+ extension slot of a Panasonic Ethernet
Switch.
2. Remove the protective cap of the SFP+
Module’s fiber optic port.
3. Connect a fiber optic cable that meets the
standards specified for the SFP+ Module.
4. Connect another SFP+ Module of the same
model number on the opposite end.
1. Unlatch the fiber optic cable and remove it from the
SFP+ Module.
2. Pull down the lever of the SFP+ Module 90 degrees as
shown in the figure to unlatch the SFP+ Module.
3. Pull out the SFP+ Module.
Installation
Removal
SFP+ extension slot
SFP+ Module
Fiber optic port
Ethernet Switch
Lever
2-12-7, Higashi-Shimbashi, Minato-ku, Tokyo Japan, 105-0021
©
2-12-7, Higashi-Shimbashi, Minato-ku, Tokyo Japan, 105-0021
©
Panasonic Electric Works Networks Co.,Ltd.
Panasonic Electric Works Networks Co.,Ltd. 2022