ZyXEL Communications ZyXEL ZyWALL P1, Руководство пользователя

Страница: 185 / 369

ZyWALL P1 User’s Guide
184 Chapter 11 Network Address Translation (NAT)
Figure 80 NAT: Port Forwarding
The following table describes the labels in this screen.
Table 66 NAT: Port Forwarding
LABEL DESCRIPTION
Default Server In addition to the servers for specified services, NAT supports a default server. A
default server receives packets from ports that are not specified in this screen. If you
do not assign a Default Server IP address, the ZyWALL discards all packets
received for ports that are not specified here or in the remote management setup.
Go To Page Choose a page from the drop-down list box to display the corresponding summary
page of the port forwarding servers.
# This is the number of an individual port forwarding server entry.
Active Select this check box to enable the port forwarding server entry. Clear this check box
to disallow forwarding of these ports to an inside server without having to delete the
entry.
Name Enter a name to identify this port-forwarding rule.
Incoming Port(s) Enter a port number here. To forward only one port, enter it again in the second field.
To specify a range of ports, enter the last port to be forwarded in the second field.
Port Translation Enter the port number here to which you want the ZyWALL to translate the incoming
port. For a range of ports, you only need to enter the first number of the range to
which you want the incoming ports translated, the ZyWALL automatically calculates
the last port of the translated port range.
Server IP
Address
Enter the inside IP address of the server here.