ZyXEL Communications ZyXEL ZyWALL P1, Руководство пользователя

Страница: 177 / 369

ZyWALL P1 User’s Guide
176 Chapter 10 Certificates
The following table describes the labels in this screen.
Table 61 Certificates: Directory Server: Add
LABEL DESCRIPTION
Directory Service
Setting
Name Type up to 31 ASCII characters (spaces are not permitted) to identify this directory
server.
Access Protocol Use the drop-down list box to select the access protocol used by the directory
server.
LDAP (Lightweight Directory Access Protocol) is a protocol over TCP that
specifies how clients access directories certificates and lists of revoked
certificates.
a
a. At the time of writing, LDAP is the only choice of directory server access protocol.
Server Address Type the IP address (in dotted decimal notation) or the domain name of the
directory server.
Server Port This field displays the default server port number of the protocol that you select in
the Access Protocol field.
You may change the server port number if needed, however you must use the
same server port number that the directory server uses.
389 is the default server port number for LDAP.
Login Setting
Login The ZyWALL may need to authenticate itself in order to assess the directory
server. Type the login name (up to 31 ASCII characters) from the entity
maintaining the directory server (usually a certification authority).
Password Type the password (up to 31 ASCII characters) from the entity maintaining the
directory server (usually a certification authority).
Apply Click Apply to save your changes back to the ZyWALL.
Cancel Click Cancel to quit configuring this screen and return to the Directory Servers
screen.