manualshive.com logo in svg

ZyXEL Communications ZyXEL ZyWALL 5, Руководство пользователя

Характеристики межсетевого экрана ZyXEL ZyWALL 5 предоставляют надежную защиту для вашей сети. Скачайте бесплатное руководство пользователя на нашем сайте для более детальной информации о настройке и использовании этого устройства. {ссылка на ваш сайт}

Поделиться
Скачать
background image

ZyWALL 5 User’s Guide

Chapter 4 LAN Screens

89

4.6  Configuring Static DHCP

This table allows you to assign IP addresses on the LAN to specific individual computers 
based on their MAC Addresses. 

Multicast

Select 

IGMP V-1

 or 

IGMP V-2 

or 

None

. IGMP (Internet Group Multicast Protocol) is 

a network-layer protocol used to establish membership in a Multicast group - it is 

not used to carry user data. IGMP version 2 (RFC 2236) is an improvement over 

version 1 (RFC 1112) but IGMP version 1 is still in wide use. If you would like to 

read more detailed information about interoperability between IGMP version 2 and 

version 1, please see sections 4 and 5 of RFC 2236.

DHCP Setup

DHCP 

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows 

individual clients (workstations) to obtain TCP/IP configuration at startup from a 

server. Unless you are instructed by your ISP, leave this field set to 

Server

. When 

configured as a server, the ZyWALL provides TCP/IP configuration for the clients. 

When set as a server, fill in the 

IP Pool Starting Address 

and

 Pool Size

 fields.

Select 

Relay 

to have the ZyWALL forward DHCP requests to another DHCP 

server. When set to 

Relay

, fill in the 

DHCP Server Address 

field.

Select 

None 

to stop the ZyWALL from acting as a DHCP server. When you select 

None

, you must have another DHCP server on your LAN, or else the computers 

must be manually configured.

IP Pool Starting 

Address

This field specifies the first of the contiguous addresses in the IP address pool.

Pool Size

This field specifies the size, or count of the IP address pool.

DHCP Server 

Address

If 

Relay

 is selected in the 

DHCP

 field above, then type the IP address of the actual, 

remote DHCP server here.

Windows 

Networking 

(NetBIOS over 

TCP/IP)

NetBIOS (Network Basic Input/Output System) are TCP or UDP packets that 

enable a computer to connect to and communicate with a LAN. For some dial-up 

services such as PPPoE or PPTP, NetBIOS packets cause unwanted calls. 

However it may sometimes be necessary to allow NetBIOS packets to pass 

through to the WAN in order to find a computer on the WAN.

Allow between 

LAN and WAN

Select this check box to forward NetBIOS packets from the LAN to the WAN and 

from the WAN to the LAN. If your firewall is enabled with the default policy set to 

block WAN to LAN traffic, you also need to enable the default WAN to LAN firewall 

rule that forwards NetBIOS traffic.
Clear this check box to block all NetBIOS packets going from the LAN to the WAN 

and from the WAN to the LAN.

Allow between 

LAN and DMZ

Select this check box to forward NetBIOS packets from the LAN to the DMZ and 

from the DMZ to the LAN. (Not all ZyWALL models have a DMZ port.) If your 

firewall is enabled with the default policy set to block DMZ to LAN traffic, you also 

need to enable the default DMZ to LAN firewall rule that forwards NetBIOS traffic.
Clear this check box to block all NetBIOS packets going from the LAN to the DMZ 

and from the DMZ to the LAN.

Apply

Click 

Apply

 to save your changes back to the ZyWALL.

Reset

Click 

Reset

 to begin configuring this screen afresh.

Table 17   

LAN  (continued)

LABEL

DESCRIPTION

Содержание ZyXEL ZyWALL 5





























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ZyXEL ZyWALL 5

IBASE Technology FWA8600 User Manual preview
FWA8600
Бренд: IBASE Technology Страницы: 112
Fortinet FortiMail-4000 Quick Start Manual preview
FortiMail-4000
Бренд: Fortinet Страницы: 2
Nexcom vDNA 1160 User Manual preview
vDNA 1160
Бренд: Nexcom Страницы: 81
Nexcom NSA 5150 User Manual preview
NSA 5150
Бренд: Nexcom Страницы: 84
SonicWALL TZ 170 Getting Started Manual preview
TZ 170
Бренд: SonicWALL Страницы: 30
IBASE Technology FWA6504 User Manual preview
FWA6504
Бренд: IBASE Technology Страницы: 16
NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Installation Manual preview
STM150 - ProSecure Web And Email Threat Management Appliance
Бренд: NETGEAR Страницы: 2
NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Appliance Reference Manual preview
STM150 - ProSecure Web And Email Threat Management Appliance
Бренд: NETGEAR Страницы: 248
Lanner FW-7541 User Manual preview
FW-7541
Бренд: Lanner Страницы: 51
Vasco Personal aXsGUARD How-To Manual preview
Personal aXsGUARD
Бренд: Vasco Страницы: 49
Fortinet FortiGate FortiGate-300A Administration Manual preview
FortiGate FortiGate-300A
Бренд: Fortinet Страницы: 392
Draytek VIGOR2950 User Manual preview
VIGOR2950
Бренд: Draytek Страницы: 217
Global Technology GB-750 Product Manual preview
GB-750
Бренд: Global Technology Страницы: 28
ei3 Amphion S14-H Green Box User Manual preview
Amphion S14-H Green Box
Бренд: ei3 Страницы: 26
IBASE Technology FWA8800-SHD User Manual preview
FWA8800-SHD
Бренд: IBASE Technology Страницы: 69

Бренды по названию

Популярные бренды

Загрузить еще бренды