ZyXEL Communications ZyXEL ZyWALL 5 Скачать руководство пользователя страница 474

Страница: 474 / 668

ZyWALL 5 User’s Guide

472

Chapter 35 Filter Configuration

35.3 Example Filter

Let’s look at an example to block outside users from accessing the ZyWALL via telnet. Please
see our included disk for more example filters.

Figure 286

Telnet Filter Example

Enter 21

from the main menu to open

Menu 21 - Filter and Firewall Setup

Enter 1 to open Menu 21.1 - Filter Set Configuration.

Enter the index of the filter set you wish to configure (say 3) and press

[ENTER]

Enter a descriptive name or comment in the

Edit Comments

field and press

[ENTER].

Press

[ENTER]

at the message [Press ENTER to confirm] to open

Menu 21.1.3 - Filter

Rules Summary

Enter 1

to configure the first filter rule (the only filter rule of this set). Make the entries in

this menu as shown in the following figure.

Yes

, a matching packet is passed to the next filter rule before an action is taken; else the

packet is disposed of according to the action fields.
If

More

Yes

, then Action Matched and Action Not Matched will be

Log

Select the logging option from the following:

None

- No packets will be logged.

Action Matched

- Only packets that match the rule parameters will be logged.

Action Not Matched

- Only packets that do not match the rule parameters will be logged.

Both

– All packets will be logged.

Action

Matched

Select the action for a packet matching the rule.
Options are

Check Next Rule

Forward

and

Drop

Action Not

Matched

Select the action for a packet not matching the rule.
Options are

Check Next Rule

Forward

and

Drop

Once you have completed filling in

Menu 21.1.1.1 - Generic Filter Rule

, press [ENTER] at the

message “Press ENTER to Confirm” to save your configuration, or press [ESC] to cancel. This data will

now be displayed on

Menu 21.1.1 - Filter Rules Summary

Table 183

Generic Filter Rule Menu Fields

FIELD

DESCRIPTION

Содержание ZyXEL ZyWALL 5





























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ZyXEL ZyWALL 5

Отзывы:

ZyXEL Communications ZyXEL ZyWALL 5, Руководство пользователя, Страница: 474 / 668

Результаты поиска

Содержание ZyXEL ZyWALL 5

Отзывы: