manualshive.com logo in svg

ZyXEL Communications ZyXEL ZyWALL 5, Руководство пользователя, Страница: 239 / 668

Поделиться
Скачать
ZyXEL Communications ZyXEL ZyWALL 5 Скачать руководство пользователя страница 239

ZyWALL 5 User’s Guide

Chapter 14 VPN Screens

237

The following table describes the labels in this screen.

Table 69   

VPN Rules (IKE): Network Policy Edit  

LABEL

DESCRIPTION

Active

If the 

Active

 check box is selected, packets for the tunnel trigger the ZyWALL to 

build the tunnel. 
Clear the 

Active

 check box to turn the network policy off. The ZyWALL does not 

apply the policy. Packets for the tunnel do not trigger the tunnel. 
If you clear the 

Active

 check box while the tunnel is up (and click 

Apply

), you 

turn off the network policy and the tunnel goes down.

Name

Type a name to identify this VPN policy. You may use any character, including 

spaces, but the ZyWALL drops trailing spaces.

Protocol

Enter 1 for ICMP, 6 for TCP, 17 for UDP, etc. 0 is the default and signifies any 

protocol. 

Nailed-Up

Select this check box to turn on the nailed up feature for this SA. 
Turn on nailed up to have the ZyWALL automatically reinitiate the SA after the 

SA lifetime times out, even if there is no traffic. The ZyWALL also reinitiates the 

SA when it restarts.
The ZyWALL also rebuilds the tunnel if it was disconnected due to the output or 

input idle timer.

Allow NetBIOS 

Traffic Through 

IPSec Tunnel 

NetBIOS (Network Basic Input/Output System) are TCP or UDP packets that 

enable a computer to connect to and communicate with a LAN. It may 

sometimes be necessary to allow NetBIOS packets to pass through VPN 

tunnels in order to allow local computers to find computers on the remote 

network and vice versa.
Select this check box to send NetBIOS packets through the VPN connection. 

Check IPSec Tunnel 

Connectivity 

Select the check box and configure an IP address in the 

Ping this Address 

field 

to have the ZyWALL periodically test the VPN tunnel to the remote IPSec router. 
The ZyWALL pings the IP address every minute. The ZyWALL starts the IPSec 

connection idle timeout timer when it sends the ping packet. If there is no traffic 

from the remote IPSec router by the time the timeout period expires, the 

ZyWALL disconnects the VPN tunnel.

Log

Select this check box to set the ZyWALL to create logs when it cannot ping the 

remote device.  

Ping this Address

If you select 

Check IPSec Tunnel Connectivity

, enter the IP address of a 

computer at the remote IPSec network. The computer's IP address must be in 

this IP policy's remote range (see the 

Remote Network

 fields).

Gateway Policy 

Information 

Gateway Policy

Select the gateway policy with which you want to use the VPN policy.

Local Network 

Local IP addresses must be static and correspond to the remote IPSec router's 

configured remote IP addresses. 
Two active SAs cannot have the local and remote IP address(es) both the same. 

Two active SAs can have the same local or remote IP address, but not both. 

You can configure multiple SAs between the same local and remote IP 

addresses, as long as only one is active at any time.

Address Type

Use the drop-down list box to choose 

Single Address

, 

Range Address

, or 

Subnet Address

. Select 

Single Address

 for a single IP address. Select 

Range 

Address

 for a specific range of IP addresses. Select 

Subnet Address

 to 

specify IP addresses on a network by their subnet mask.

Содержание ZyXEL ZyWALL 5





























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов