manualshive.com logo in svg

ZyXEL Communications ZyXEL ZyWALL 5, Руководство пользователя, Страница: 145 / 668

Поделиться
Скачать
ZyXEL Communications ZyXEL ZyWALL 5 Скачать руководство пользователя страница 145

ZyWALL 5 User’s Guide

Chapter 8 DMZ Screens

143

C

H A P T E R

 8

DMZ Screens

This chapter describes how to configure the ZyWALL’s DMZ.

8.1  DMZ Overview

The DeMilitarized Zone (DMZ) auto-negotiating 10/100 Mbps Ethernet port provides a way 
for public servers (Web, e-mail, FTP, etc.) to be visible to the outside world (while still being 
protected from DoS (Denial of Service) attacks such as SYN flooding and Ping of Death). 
These public servers can also still be accessed from the secure LAN. 

By default the firewall allows traffic between the WAN and the DMZ, traffic from the DMZ to 
the LAN is denied, and traffic from the LAN to the DMZ is allowed. Internet users can have 
access to host servers on the DMZ but no access to the LAN, unless special filter rules 
allowing access were configured by the administrator or the user is an authorized remote user. 

It is highly recommended that you connect all of your public servers to the DMZ port. If you 
have more than one public server, connect a hub to the DMZ port. 

It is also highly recommended that you keep all sensitive information off of the public servers 
connected to the DMZ port. Store sensitive information on LAN computers.

8.2  Configuring DMZ

The DMZ port and the computers connected to it can have private or public IP addresses.

When the DMZ uses public IP addresses, the WAN and DMZ ports must use public IP 
addresses that are on separate subnets. See 

Appendix C on page 555

 for information on IP 

subnetting. If you do not configure SUA NAT or any full feature NAT mapping rules for the 
public IP addresses on the DMZ, the ZyWALL will route traffic to the public IP addresses on 
the DMZ without performing NAT. This may be useful for hosting servers for NAT unfriendly 
applications (see 

Chapter 17 on page 281

 for more information).

If the DMZ computers use private IP addresses, use NAT if you want to make them publicly 
accessible. 

Unlike the LAN, the ZyWALL does not assign TCP/IP configuration via DHCP to computers 
connected to the DMZ port(s). Manually assign the computers static IP addresses (in the same 
subnet as the DMZ port's IP address), DNS server addresses and the ZyWALL's DMZ IP 
address as the default gateway.

Содержание ZyXEL ZyWALL 5





























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов