ZyXEL Communications ZyXEL ZyAIR G-260, Руководство пользователя

Страница: 31 / 82

ZyXEL G-260 User’s Guide
31 Chapter 2 Wireless LAN Network
2.5.2 Starting OTIST
Note: You must click Start in the AP OTIST web configurator screen and Save in the
wireless client(s) Adapter screen all within three minutes (at the time or
writing). You can start OTIST in the wireless clients and AP in any order but
they must all be within range and have OTIST enabled.
2.5.3 Notes on OTIST
1 If you enabled OTIST in the wireless client, you see this screen each time you start the
ZyXEL utility. Click
Yes for it to search for an OTIST-enabled AP.
2
If an OTIST-enabled wireless client loses its wireless connection for more than ten
seconds, it will search for an OTIST-enabled AP for up to one minute. (If you manually
have the wireless client search for an OTIST-enabled AP, there is no timeout; click
Cancel in the OTIST progress screen to stop the search.)
1 In the AP, a web configurator screen pops
up showing you the security settings to
transfer. After reviewing the settings, click
OK .
2 This screen appears while OTIST settings are being transferred. It closes when the
transfer is complete.
• In the wireless client, you see this screen if
it can't find an OTIST-enabled AP (with the
same
Setup key ). Click OK to go back to
the ZyXEL utility main screen.
• If there is more than one OTIST-enabled AP within range, you see a screen asking you
to select one AP to get settings from.