ZyXEL Communications ZyWall, Справочное руководство, Страница: 69 / 394

Chapter 6 Interfaces
ZyWALL (ZLD) CLI Reference Guide
69
[no] budget data active {download-
upload|download|upload}
<1..100000>
Sets how much downstream and/or upstream data (in Mega
bytes) can be transmitted via the 3G connection within one
month.
download
: set a limit on the downstream traffic (from the ISP
to the ZyWALL).
upload
: set a limit on the upstream traffic (from the ZyWALL
to the ISP).
download-upload
: set a limit on the total traffic in both
directions.
If you change the value, the ZyWALL resets the statistics.
Use the
no
command to disable data budget control.
budget reset-day <0..31>
Sets the date on which the ZyWALL resets the budget every
month. If the date you selected is not available in a month,
such as 30th or 31th, the ZyWALL resets the budget on the
last day of the month.
budget reset-counters
Resets the time and data budgets immediately. The count
starts over with the 3G connection’s full configured monthly
time and data budgets. This does not affect the normal
monthly budget restart.
budget {log|log-alert}[recursive
<1..65535>]
Sets the ZyWALL to create a log (log) or an alert log (log-
alert) when the time or data limit is exceeded. You can also
specify how often (from 1 to 65535 minutes) to generate a log
or an alert.
no budget log [recursive]
Sets the ZyWALL to not create a log when the time or data
limit is exceeded. Specify
recursive
to have the ZyWALL
only create a log one time when the time or data limit is
exceeded.
budget new-connection
{allow|disallow}
Sets to permit (
allow
) or drop/block (
disallow
) new 3G
connections when the time or data limit is exceeded.
budget current-connection
{keep|drop}
Sets to maintain the existing 3G connection (keep) or
disconnect it (drop) when the time or data limit is exceeded.
You cannot set budget new-connection to
allow
and budget
current-connection to
drop
at the same time.
If you set budget new-connection to disallow and budget
current-connection to keep, the ZyWALL allows you to
transmit data using the current connection, but you cannot
build a new connection if the existing connection is
disconnected.
budget percentage {ptime|pdata}
<0..99>
Sets a percentage (0~99) of time budget (
ptime
) or data
(
pdata
) limit. When the specified limit is exceeded, the
ZyWALL takes the action configured using the
budget
{log-percentage|log-percentage-alert}
command
.
budget {log-percentage|log-
percentage-alert} [recursive
<1..65535>]
Sets to have the ZyWALL create a log (
log-percentage
) or
an alart log (
log-percentage-alert
) when the set
percentage of time budget or data limit is exceeded. You can
configure the percentage using the
budget percentage
command.
You can also set how often (from 1 to 65535 minutes) to send
the log or alert.
Table 27 Cellular Interface Commands (continued)
COMMAND DESCRIPTION