ZyXEL Communications ZyWall, Справочное руководство, Страница: 169 / 394

Chapter 19 Application Patrol
ZyWALL (ZLD) CLI Reference Guide
169
19.2.6 General Commands for Application Patrol
"
You must register for the IDP/AppPatrol signature service (at least the trial)
before you can use it. See
Chapter 5 on page 37 .
This table lists the general commands for application patrol.
[no] action-block
{login|message|audio|video|file-transfer}
Blocks use of a specific feature.
bandwidth {inbound|outbound} <0..1048576>
Limits inbound or outbound bandwidth, in kilobits
per second. 0 disables bandwidth management for
traffic matching this rule.
[no] bandwidth excess-usage
Enables maximize bandwidth usage to let the traffic
matching this policy “borrow” any unused
bandwidth on the out-going interface.
bandwidth priority <1..7>
Set the priority for traffic that matches this rule. The
smaller the number, the higher the priority.
[no] inbound-dscp-mark {<0..63> | class
{default | dscp_class }}
This is how the ZyWALL handles the DSCP value
of the outgoing packets to a connection’s initiator
that match this policy.
Enter a DSCP value to have the ZyWALL apply
that DSCP value. Set this to the class
default
to
have the ZyWALL set the DSCP value to 0.
[no] log [alert]
Creates log entries (and alerts) for traffic that
matches the rule. The
no command does not
create any log entries.
[no] outbound-dscp-mark {<0..63> | class
{default | dscp_class }}
This is how the ZyWALL handles the DSCP value
of the outgoing packets from a connection’s initiator
that match this policy.
Enter a DSCP value to have the ZyWALL apply
that DSCP value. Set this to the class
default
to
have the ZyWALL set the DSCP value to 0.
show
Displays the rule’s configuration
Table 86 app patrol other rule Sub-commands (continued)
COMMAND DESCRIPTION
Table 87 app Commands: Pre-Defined Applications
COMMAND DESCRIPTION
[no] app activate
Turns on application patrol. The no command
turns off application patrol.
[no] app highest sip bandwidth priority
Turns the option to maximize the throughput of SIP
traffic on or off.
[no] app protocol_name bandwidth-graph
Sets the specified protocol to display on the
bandwidth statistics graph. The
no command has it
not display on the bandwidth statistics graph.