ZyXEL Communications ZyWall USG20-VPN Скачать руководство пользователя

Страница: 602 / 683

Chapter 31 Log and Report

USG20(W)-VPN Series User’s Guide

602

Figure 424

Log Category Settings AC

This screen provides a different view and a different way of indicating which messages are included
in each log and each alert. Please see

Section 31.3.2 on page 594

, where this process is discussed.

(The

Default

category includes debugging messages generated by open source software.)

The following table describes the fields in this screen.

Table 262

Configuration > Log & Report > Log Setting > Log Category Settings

LABEL

DESCRIPTION

System Log

Use the

System Log

drop-down list to change the log settings for all of the log categories.

disable all logs

(red X) - do not log any information for any category for the system log or

e-mail any logs to e-mail server 1 or 2.

enable normal logs

(green check mark) - create log messages and alerts for all categories

for the system log. If e-mail server 1 or 2 also has normal logs enabled, the USG will e-mail
logs to them.

enable normal logs and debug logs

(yellow check mark) - create log messages, alerts,

and debugging information for all categories. The USG does not e-mail debugging
information, even if this setting is selected.

USB Storage

Use the

USB Storage

drop-down list to change the log settings for saving logs to a

connected USB storage device.

disable all logs

(red X) - do not log any information for any category to a connected USB

storage device.

enable normal logs

(green check mark) - create log messages and alerts for all categories

and save them to a connected USB storage device.

enable normal logs and debug logs

(yellow check mark) - create log messages, alerts,

and debugging information for all categories and save them to a connected USB storage
device.

Содержание ZyWall USG20-VPN












































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ZyWall USG20-VPN

Отзывы:

Похожие инструкции для ZyWall USG20-VPN

Бренды по названию

Популярные бренды

ZyXEL Communications ZyWall USG20-VPN, Руководство пользователя

Результаты поиска

Содержание ZyWall USG20-VPN

Отзывы:

Похожие инструкции для ZyWall USG20-VPN

Бренды по названию

Популярные бренды