ZyXEL Communications ZyWall USG20-VPN, Руководство пользователя

Страница: 492 / 683

Chapter 29 Object
USG20(W)-VPN Series User’s Guide
492
Figure 331
IPv4/IPv6 Address Group Configuration > Add
The following table describes the labels in this screen.
29.6 Service Overview
Use service objects to define TCP applications, UDP applications, and ICMP messages. You can also
create service groups to refer to multiple service objects in other features.
• Use the Service screens ( Section 29.6.2 on page 493 ) to view and configure the USG’s list of
services and their definitions.
• Use the Service Group screens ( Section 29.6.2 on page 493 ) to view and configure the USG’s
list of service groups.
Table 202
IPv4/IPv6 Address Group Configuration > Add
LABEL DESCRIPTION
Name Enter a name for the address group. You may use 1-31 alphanumeric characters,
underscores(
_
), or dashes (-), but the first character cannot be a number. This value is
case-sensitive.
Description This field displays the description of each address group, if any. You can use up to 60
characters, punctuation marks, and spaces.
Member List The Member list displays the names of the address and address group objects that have
been added to the address group. The order of members is not important.
Select items from the Available list that you want to be members and move them to the
Member list. You can double-click a single entry to move it or use the [Shift] or [Ctrl] key
to select multiple entries and use the arrow button to move them.
Move any members you do not want included to the Available list.
OK Click OK to save your changes back to the USG.
Cancel Click Cancel to exit this screen without saving your changes.