ZyXEL Communications ZyWall USG20-VPN Скачать руководство пользователя страница 121

Страница: 121 / 683

Chapter 6 Monitor

USG20(W)-VPN Series User’s Guide

121

The following table describes the labels in this screen.

6.14.3 Wireless Station Info

This screen displays information about connected wireless stations. Click

Monitor > Wireless >

Station Information

to display this screen.

Figure 102

Monitor > Wireless > Station List

The following table describes the labels in this screen.

Table 47

Monitor > Wireless > AP Info > Radio List > More Information

LABEL

DESCRIPTION

MBSSID Detail

This list shows information about the SSID(s) that is associated with the radio.

This is the items sequential number in the list. It has no bearing on the actual data in this
list.

SSID Name

This displays an SSID associated with this radio. There can be up to eight maximum.

BSSID

This displays the MAC address associated with the SSID.

Security

Mode

This displays the security mode in which the SSID is operating.

VLAN

This displays the VLAN ID associated with the SSID.

Traffic Statistics

This graph displays the overall traffic information about the radio over the preceding 24
hours.

y-axis

This axis represents the amount of data moved across this radio per second.

x-axis

This axis represents the amount of time over which the data moved across this radio.

Station Count

This graph displays information about all the wireless clients that have connected to the
radio over the preceding 24 hours.

y-axis

The y-axis represents the number of connected wireless clients.

x-axis

The x-axis shows the time over which a wireless client was connected.

Last Update

This field displays the date and time the information in the window was last updated.

Click this to close this window.

Cancel

Click this to close this window.

Table 48

Monitor > Wireless > Station List

LABEL

DESCRIPTION

This field is a sequential value, and it is not associated with a specific station.

MAC Address

This field displays the MAC address of the station.

Associated AP

This field displays the AP that

is associated with the station.

SSID Name

This indicates the name of the wireless network to which the station is connected. A
single AP can have multiple SSIDs or networks.

Security Mode

This field displays the security mode the station is using.

Содержание ZyWall USG20-VPN












































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ZyWall USG20-VPN

Отзывы:

ZyXEL Communications ZyWall USG20-VPN, Руководство пользователя, Страница: 121 / 683

Результаты поиска

Содержание ZyWall USG20-VPN

Отзывы: