ZyXEL Communications ZyWall USG20-VPN Скачать руководство пользователя страница 118

Страница: 118 / 683

Chapter 6 Monitor

USG20(W)-VPN Series User’s Guide

118

The following table describes the fields in the previous screen.

6.14

Wireless

Wireless contains AP information and Station Info menus.

6.14.1 Wireless AP Information: Radio List

Click

Monitor > Wireless > AP Information > Radio List

to display the

Radio List

screen.

Figure 100

Monitor > Wireless > Radio List

The following table describes the labels in this screen.

Table 45

Monitor > System Status > Ethernet Neighbor

LABEL

DESCRIPTION

Local Port (Description)

This field displays the port of the USG, on which the neighboring device is
discovered.

For USGs that support

Port Role

, if ports 3 to 5 are grouped together and there is

a connection to P5 only, the USG will display P3 as the interface port number
(even though there is no connection to that port).

Model Name

This field displays the model name of the discovered device.

System Name

This field displays the system name of the discovered device.

Firmware Version

This field displays the firmware version of the discovered device.

Port (Description)

This field displays the first internal port on the discovered device. Internal is an
interface type displayed in the

Network > Interface > Ethernet > Edit

screen.

For example, if P1 and P2 are WAN, P3 to P5 are LAN, and P6 is DMZ, then USG
will display P3 as the first internal interface port number.

For USGs that support

Port Role

, if ports 3 to 5 are grouped together and there is

a connection to P5 only, the USG will display P3 as the first internal interface port
number (even though there is no connection to that port).

IP Address

This field displays the IP address of the discovered device.

MAC Address

This field displays the MAC address of the discovered device.

Refresh

Click this button to update the information in the screen.

Table 46

Monitor > Wireless > Radio List

LABEL

DESCRIPTION

More Information

Click this icon to see the traffic statistics, station count, SSID, Security Mode and VLAN
ID information on the AP.

This field is a sequential value, and it is not associated with a specific radio.

AP Description

This field displays the description of the AP.

Содержание ZyWall USG20-VPN












































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ZyWall USG20-VPN

Отзывы:

ZyXEL Communications ZyWall USG20-VPN, Руководство пользователя, Страница: 118 / 683

Результаты поиска

Содержание ZyWall USG20-VPN

Отзывы: