ZyXEL Communications ZyWALL USG Series, Справочное руководство

Страница: 54 / 426

Chapter 6 AP Management
ZyWALL / USG (ZLD) CLI Reference Guide
54
The following table describes the commands available for AP management. You must use the
configure terminal
command to enter the configuration mode before you can use these
commands.
Table 10
Command Summary: AP Management
COMMAND DESCRIPTION
capwap ap add ap_mac [ ap_model ]
Adds the specified AP to the ZyWALL / USG for management. If
manual add is disabled, this command can still be used; if you
add an AP before it connects to the network, then this command
simply preconfigures the management list with that AP’s
information.
capwap ap kick {all | ap_mac }
Removes the specified AP (
ap_mac
) or all connected APs (
all
)
from the management list. Doing this removes the AP(s) from the
management list.
If the ZyWALL / USG is set to automatically add new APs to the
AP management list, then any kicked APs are added back to the
management list as soon as they reconnect.
capwap ap reboot ap_mac
Forces the specified AP (
ap_mac
) to restart. Doing this severs the
connections of all associated stations.
capwap ap ap_mac
Enters the sub-command mode for the specified AP.
slot_name ap-profile profile_name
Sets the radio (
slot_name
) to AP mode and assigns a created
profile to the radio.
no slot_name ap-profile
Removes the AP mode profile assignment for the specified radio
(
slot_name
).
description ap_description
Sets the description for the specified AP.
[no] force vlan
Sets whether or not the ZyWALL / USG changes the AP’s
management VLAN to match the one you configure using the
vlan
sub-command. The management VLAN on the ZyWALL /
USG and AP must match for the ZyWALL / USG to manage the AP.
vlan <1..4094> {tag | untag}
Sets the VLAN ID for the specified AP as well as whether packets
sent to and from that ID are tagged or untagged.
exit
Exits the sub-command mode for the specified AP.
capwap manual-add {enable | disable}
Allows the ZyWALL / USG to either automatically add new APs to
the network (
disable
) or wait until you manually confirm them
(
enable
).
capwap show statistic
Displays statistics about the wireless radio transmitters in each of
the APs connected to the ZyWALL / USG.
capwap station kick sta_mac
Forcibly disconnects the specified station from the network.
show capwap ap wait-list
Displays a list of connected but as-of-yet unmanaged APs. This is
known as the ‘wait list’.
show capwap ap ap_mac slot_name detail
Displays details for the specified radio (
slot_name
) on the
specified AP (
ap_mac
).
show capwap ap {all | ap_mac }
Displays the management list (
all
) or whether the specified AP is
on the management list (
ap_mac
).
show capwap ap {all | ap_mac } config status
Displays whether or not any AP’s configuration or the specified
AP’s configuration is in conflict with the ZyWALL / USG’s settings
for the AP and displays the settings in conflict if there are any.
show capwap ap all statistics
Displays radio statistics for all APs on the management list.
show capwap manual-add
Displays the current manual add option.
show capwap station all
Displays information for all stations connected to the APs on the
management list.