ZyXEL Communications ZyWall USG 50-H Series, Руководство пользователя, Страница: 162 / 704

Chapter 8 Interface
ZyWALL USG 50-H User’s Guide
162
8.5 WAN Interface Wizards
You can use the WAN interface wizard (instead of the regular Ethernet Edit screen) to
configure a WAN, or PPP (WAN) interface. To access the interface wizard screens:
• Click Network > Interface > Ethernet and then a WAN interface’s Edit icon and the
Wizard tab.
• Or click Network > Interface > PPP and then a WAN interface’s Edit icon and the
Wizard tab.
Enter the Internet access information exactly as your ISP gave it to you. Leave a field blank if
you don’t have that information.
8.5.1 WAN Interface Wizard WAN Type
This screen appears. Select the type of encapsulation this interface uses for its Internet
connection.
Authentication Select an authentication method, or disable authentication. To exchange OSPF
routing information with peer border routers, you must use the same
authentication method that they use. Choices are:
Same-as-Area - use the default authentication method in the area
None - disable authentication
Text - authenticate OSPF routing information using a plain-text password
MD5 - authenticate OSPF routing information using MD5 encryption
Text
Authentication
Key This field is available if the Authentication is Text . Type the password for text
authentication. The key can consist of alphanumeric characters and the
underscore, and it can be up to eight characters long.
MD5
Authentication
ID This field is available if the Authentication is MD5 . Type the ID for MD5
authentication. The ID can be between 1 and 255.
MD5
Authentication
Key This field is available if the Authentication is MD5 . Type the password for MD5
authentication. The password can consist of alphanumeric characters and the
underscore, and it can be up to 16 characters long.
MAC Address
Setting This option is available for the WAN interfaces. You can configure the interface's
MAC address by either using the factory assigned default MAC Address,
manually specifying a MAC address, or cloning the MAC address of another
device or computer.
Use Default
MAC Address Select this option to have the interface use the factory assigned default MAC
address. By default, the ZyWALL uses the factory assigned MAC address to
identify itself.
Overwrite
Default MAC
Address Select this option to have the interface use a different MAC address. Either
enter the MAC address in the fields or click
Clone by host and enter the IP
address of the device or computer whose MAC you are cloning. Once it is
successfully configured, the address will be copied to the configuration file. It
will not change unless you change the setting or upload a different configuration
file.
OK Click OK to save your changes back to the ZyWALL.
Cancel Click Cancel to exit this screen without saving.
Table 45 Network > Interface > Ethernet > Edit
LABEL DESCRIPTION