ZyXEL Communications ZyWALL USG 100 Series, Руководство пользователя

Страница: 776 / 1157

Chapter 44 AAA Server
ZyWALL USG 100/200 Series User’s Guide
776
Click Configuration > Object > AAA Server > RADIUS to display the RADIUS
screen.
Figure 512 Configuration > Object > AAA Server > RADIUS
The following table describes the labels in this screen.
Table 216 Configuration > Object > AAA Server > RADIUS
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where
you can modify the entry’s settings.
Remove To remove an entry, select it and click Remove . The ZyWALL confirms
you want to remove it before doing so.
Object
References Select an entry and click Object Reference s to open a screen that
shows which settings use the entry. See Section 13.3.2 on page 312 for
an example.
# This field displays the index number.
Name This is the name of the RADIUS server entry.
Server
Address This is the address of the AD or LDAP server.
Base DN This specifies a directory. For example,
o=ZyXEL, c=US
.
Host Enter the IP address (in dotted decimal notation) or the domain name (up
to 63 alphanumeric characters) of a RADIUS server.
Authentication
Port The default port of the RADIUS server for authentication is 1812 .
You need not change this value unless your network administrator
instructs you to do so with additional information.
Key Enter a password (up to 15 alphanumeric characters) as the key to be
shared between the external authentication server and the ZyWALL.
The key is not sent over the network. This key must be the same on the
external authentication server and the ZyWALL.
Timeout Specify the timeout period (between 1 and 300 seconds) before the
ZyWALL disconnects from the RADIUS server. In this case, user
authentication fails.
Search timeout occurs when either the user information is not in the
RADIUS server or the RADIUS server is down.
Apply Click Apply to save the changes.
Reset Click Reset to return the screen to its last-saved settings.