ZyXEL Communications ZyWALL USG 100 Series, Руководство пользователя

Страница: 435 / 1157

Chapter 20 HTTP Redirect
ZyWALL USG 100/200 Series User’s Guide
435
• a application patrol rule to allow HTTP traffic between dmz and wan1 .
• a policy route to forward HTTP traffic from proxy server A to the Internet.
Finding Out More
See Section 6.5.11 on page 107 for related information on these screens.
20.2 The HTTP Redirect Screen
To configure redirection of a HTTP request to a proxy server, click Configuration
> Network > HTTP Redirect . This screen displays the summary of the HTTP
redirect rules.
Note: You can configure up to one HTTP redirect rule for each (incoming) interface.
Figure 324 Configuration > Network > HTTP Redirect
The following table describes the labels in this screen.
Table 110 Configuration > Network > HTTP Redirect
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where
you can modify the entry’s settings.
Remove To remove an entry, select it and click Remove . The ZyWALL confirms
you want to remove it before doing so.
Activate To turn on an entry, select it and click Activate .
Inactivate To turn off an entry, select it and click Inactivate .
# This field is a sequential value, and it is not associated with a specific
entry.
Status This icon is lit when the entry is active and dimmed when the entry is
inactive.
Name This is the descriptive name of a rule.
Interface This is the interface on which the request must be received.
Proxy Server This is the IP address of the proxy server.