manualshive.com logo in svg

ZyXEL Communications ZYWALL 2 WG, Руководство пользователя

Поделиться
Скачать
ZyXEL Communications ZYWALL 2 WG Скачать руководство пользователя страница 648

Chapter 43 Firmware and Configuration File Maintenance

ZyWALL 2WG User’s Guide

648

The following table is a summary. Please note that the internal filename refers to the filename 
on the ZyWALL and the external filename refers to the filename not on the ZyWALL, that is, 
on your computer, local network or FTP site and so the name (but not the extension) may vary. 
After uploading new firmware, see the 

ZyNOS F/W Version

 field in

 Menu 24.2.1 - System 

Maintenance - Information

 to confirm that you have uploaded the correct firmware version. 

The AT command is the command you enter after you press “y” when prompted in the SMT 
menu to go into debug mode. 

43.3  Backup Configuration

"

The ZyWALL displays different messages explaining different ways to backup, 
restore and upload files in menus 24.5, 24.6, 24. 7.1 and 24.7.2 depending on 
whether you use the console port or Telnet.

Option 5 from 

Menu 24 - System Maintenance

 allows you to backup the current ZyWALL 

configuration to your computer. Backup is highly recommended once your ZyWALL is 
functioning properly. FTP is the preferred method for backing up your current configuration to 
your computer since it is faster. You can also perform backup and restore using menu 24 
through the console port. Any serial communications program should work fine; however, you 
must use Xmodem protocol to perform the download/upload and you don’t have to rename the 
files.
Please note that terms “download” and “upload” are relative to the computer. Download 
means to transfer from the ZyWALL to the computer, while upload means from your 
computer to the ZyWALL.

43.3.1  Backup Configuration

Follow the instructions as shown in the next screen. 

Table 240   

Filename Conventions

FILE TYPE

INTERNAL 

NAME

EXTERNAL NAME

DESCRIPTION

Configuration 

File

Rom-0

This is the configuration filename on the ZyWALL. 

Uploading the rom-0 file replaces the entire ROM file 

system, including your ZyWALL configurations, 

system-related data (including the default 

password), the error log and the trace log.

*.rom

Firmware

Ras

This is the generic name for the ZyNOS firmware on 

the ZyWALL.

*.bin

Содержание ZYWALL 2 WG

















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды