ZyXEL Communications ZYWALL 2 WG Скачать руководство пользователя страница 494

Страница: 494 / 784

Chapter 26 Logs Screens

ZyWALL 2WG User’s Guide

494

Table 164

System Error Logs

LOG MESSAGE

DESCRIPTION

%s exceeds the max.
number of session per
host!

This attempt to create a NAT session exceeds the maximum

number of NAT session table entries allowed to be created per

host.

setNetBIOSFilter: calloc
error

The router failed to allocate memory for the NetBIOS filter

settings.

readNetBIOSFilter: calloc
error

The router failed to allocate memory for the NetBIOS filter

settings.

WAN connection is down.

A WAN connection is down. You cannot access the network

through this interface.

Dial Backup starts

Dial backup started working.

Dial Backup ends

Dial backup stopped working.

DHCP Server cannot assign
the static IP %S (out of
range).

The LAN subnet, LAN alias 1, or LAN alias 2 was changed and

the specified static DHCP IP addresses are no longer valid.

The DHCP static IP %s is
conflict.

The static DHCP IP address conflicts with another host.

SMTP fail (%s)

The device failed to send an e-mail (error message included).

SMTP authentication fail
(%s)

The device failed to authenticate with the SMTP server (error

message included).

Table 165

Access Control Logs

LOG MESSAGE

DESCRIPTION

Firewall default policy: [ TCP |
UDP | IGMP | ESP | GRE | OSPF ]
<Packet Direction>

Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access

matched the default policy and was blocked or forwarded

according to the default policy’s setting.

Firewall rule [NOT] match:[ TCP
| UDP | IGMP | ESP | GRE | OSPF
] <Packet Direction>, <rule:%d>

Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access

matched (or did not match) a configured firewall rule

(denoted by its number) and was blocked or forwarded

according to the rule.

Triangle route packet forwarded:
[ TCP | UDP | IGMP | ESP | GRE |
OSPF ]

The firewall allowed a triangle route session to pass

through.

Packet without a NAT table entry
blocked: [ TCP | UDP | IGMP |
ESP | GRE | OSPF ]

The router blocked a packet that didn't have a

corresponding NAT table entry.

Router sent blocked web site
message: TCP

The router sent a message to notify a user that the router

blocked access to a web site that the user requested.

Exceed maximum sessions per host
(%d).

The device blocked a session because the host's

connections exceeded the maximum sessions per host.

Firewall allowed a packet that
matched a NAT session: [ TCP |
UDP ]

A packet from the WAN (TCP or UDP) matched a cone

NAT session and the device forwarded it to the LAN.

Содержание ZYWALL 2 WG

















































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ZYWALL 2 WG

Отзывы:

Бренды по названию

Популярные бренды

ZyXEL Communications ZYWALL 2 WG, Руководство пользователя

Результаты поиска

Содержание ZYWALL 2 WG

Отзывы:

Бренды по названию

Популярные бренды