ZyXEL Communications ZyWALL 110 Series Скачать руководство пользователя страница 522 | Manualshive

Страница: 522 / 562

ZyXEL Communications ZyWALL 110 Series Скачать руководство пользователя страница 522

Chapter 41 Packet Flow Explore

ZyWALL 110/310/1100 Series User’s Guide

522

41.3 The SNAT Status Screen

The SNAT Status screen allows you to view and quickly link to specific source NAT (SNAT) settings.
Click a function box in the SNAT Flow section, the related SNAT rules (activated) will display in the
SNAT Table section. To access this screen, click Maintenance > Packet Flow Explore > SNAT
Status.

The order of the SNAT flow may vary depending on whether you:

• select use default SNAT in the CONFIGURATION > Network > Interface > Trunk screen.
• use policy routes to control 1-1 NAT by using the

policy control-virtual-server-rules

activate

command.

Note: Once a packet matches the criteria of an SNAT rule, the ZyWALL takes the

corresponding action and does not perform any further flow checking.

Figure 369

Maintenance > Packet Flow Explore > SNAT Status (Policy Route SNAT)

Outgoing

This is the name of an interface which transmits packets out of the ZyWALL.

Gateway

This is the IP address of the gateway in the same network of the outgoing interface.

The following fields are available if you click SiteToSite VPN or Dynamic VPN in the Routing Flow section.

#

This field is a sequential value, and it is not associated with any entry.

Source

This is the IP address(es) of the local VPN network.

Destination

This is the IP address(es) for the remote VPN network.

VPN Tunnel

This is the name of the VPN tunnel.

The following fields are available if you click Default WAN Trunk in the Routing Flow section.

#

This field is a sequential value, and it is not associated with any entry.

Source

This is the source IP address(es) from which the packets are sent. any means any IP
address.

Destination

This is the destination IP address(es) to which the packets are transmitted. any means
any IP address.

Trunk

This is the name of the WAN trunk through which the matched packets are transmitted.

Table 211

Maintenance > Packet Flow Explore > Routing Status (continued)

LABEL

DESCRIPTION

«
...
520
521
522
523
524
...
»

Содержание ZyWALL 110 Series



















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов