manualshive.com logo in svg

ZyXEL Communications ZyWALL 110 Series, Руководство пользователя, Страница: 505 / 562

Поделиться
Скачать
ZyXEL Communications ZyWALL 110 Series Скачать руководство пользователя страница 505

 Chapter 39 File Manager

ZyWALL 110/310/1100 Series User’s Guide

505

39.3  The Firmware Package Screen 

Click Maintenance > File Manager > Firmware Package to open the Firmware Package 
screen. Use the Firmware Package screen to check your current firmware version and upload 
firmware to the ZyWALL.

Note: The Web Configurator is the recommended method for uploading firmware. You 

only need to use the command line interface if you need to recover the firmware. 

See the CLI Reference Guide for how to determine if you need to recover the 

firmware and how to recover it.

Find the firmware package at www.zyxel.com in a file that (usually) uses the system model name 
with a .bin extension, for example, “zywall.bin”. 

The firmware update can take up to five minutes. Do not turn off or reset 
the ZyWALL while the firmware update is in progress!

File Name

This column displays the label that identifies a configuration file.

You cannot delete the following configuration files or change their file names. 

The system-default.conf file contains the ZyWALL’s default settings. Select this file and 
click Apply to reset all of the ZyWALL settings to the factory defaults. This configuration 
file is included when you upload a firmware package. 

The startup-config.conf file is the configuration file that the ZyWALL is currently using. If 
you make and save changes during your management session, the changes are applied to 
this configuration file. The ZyWALL applies configuration changes made in the Web 
Configurator to the configuration file when you click Apply or OK. It applies configuration 
changes made via commands when you use the 

write

 command. 

The lastgood.conf is the most recently used (valid) configuration file that was saved 
when the device last restarted. If you upload and apply a configuration file with an error, 
you can apply lastgood.conf to return to a valid configuration.

Size

This column displays the size (in KB) of a configuration file.

Last Modified

This column displays the date and time that the individual configuration files were last 
changed or saved.

Upload 
Configuration 
File

The bottom part of the screen allows you to upload a new or previously saved 
configuration file from your computer to your ZyWALL

You cannot upload a configuration file named system-default.conf or lastgood.conf. 

If you upload startup-config.conf, it will replace the current configuration and 
immediately apply the new settings.

File Path 

Type in the location of the file you want to upload in this field or click Browse ... to find it.

Browse... 

Click Browse... to find the .conf file you want to upload. The configuration file must use a 
“.conf” filename extension. You will receive an error message if you try to upload a fie of a 
different format. Remember that you must decompress compressed (.zip) files before you 
can upload them. 

Upload 

Click Upload to begin the upload process. This process may take up to two minutes. 

Table 201   

Maintenance > File Manager > Configuration File (continued)

LABEL

DESCRIPTION

Содержание ZyWALL 110 Series



















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов