ZyXEL Communications ZyWALL 110 Series, Руководство пользователя, Страница: 443 / 562

ZyWALL 110/310/1100 Series User’s Guide
443
C
H A P T E R
3 7
System
37.1 Overview
Use the system screens to configure general ZyWALL settings.
37.1.1 What You Can Do in this Chapter
• Use the System > Host Name screen (see Section 37.2 on page 444 ) to configure a unique
name for the ZyWALL in your network.
• Use the System > USB Storage screen (see Section 37.3 on page 444 ) to configure the
settings for the connected USB devices.
• Use the System > Date/Time screen (see Section 37.4 on page 445 ) to configure the date and
time for the ZyWALL.
• Use the System > Console Speed screen (see Section 37.5 on page 449 ) to configure the
console port speed when you connect to the ZyWALL via the console port using a terminal
emulation program.
• Use the System > DNS screen (see Section 37.6 on page 450 ) to configure the DNS (Domain
Name System) server used for mapping a domain name to its corresponding IP address and vice
versa.
• Use the System > WWW screens (see Section 37.7 on page 456 ) to configure settings for HTTP
or HTTPS access to the ZyWALL and how the login and access user screens look.
• Use the System > SSH screen (see Section 37.8 on page 472 ) to configure SSH (Secure SHell)
used to securely access the ZyWALL’s command line interface. You can specify which zones allow
SSH access and from which IP address the access can come.
• Use the System > TELNET screen (see Section 37.9 on page 476 ) to configure Telnet to access
the ZyWALL’s command line interface. Specify which zones allow Telnet access and from which IP
address the access can come.
• Use the System > FTP screen (see Section 37.10 on page 478 ) to specify from which zones FTP
can be used to access the ZyWALL. You can also specify from which IP addresses the access can
come. You can upload and download the ZyWALL’s firmware and configuration files using FTP.
Please also see
Chapter 39 on page 499 for more information about firmware and configuration
files.
• Your ZyWALL can act as an SNMP agent, which allows a manager station to manage and monitor
the ZyWALL through the network. Use the System > SNMP screen (see Section 37.11 on page
479 ) to configure SNMP settings, including from which zones SNMP can be used to access the
ZyWALL. You can also specify from which IP addresses the access can come.
• Use the System > Language screen (see Section 37.12 on page 483 ) to set a language for the
ZyWALL’s Web Configurator screens.
• Use the System > IPv6 screen (see Section 37.13 on page 483 ) to enable or disable IPv6
support on the ZyWALL.
Note: See each section for related background information and term definitions.