can be access by typing in the IP address of the ZyAIR G-5100 in users web
browser. To access the ZyAIR G-5100's web configurator via web browser,
the configuration PC must be in the same IP segment of ZyAIR G-5100 and
ZyAIR G-5100 must be reachable to the configuration station.
3. What is the default username and password? Moreover, how do I
change it?
The default username is "admin" and can not be changed, the default password
is 1234. You can change the password once you enter the web configuration
menu under "ADVANCED"->"SYSTEM" and press the Password tab. At the
password screen type in the old password and the new password and retype to
confirm than press "Apply" button to save the change.
4. How do I upload the ZyNOS firmware code via embeded web
configurator?
The procedure for uploading ZyNOS via embeded web configurator is as
follows.
a. Log on into the web configurator
b. Press "MAINTENANCE" from the left menu.
c. Press "F/W Upload" from the left menu.
d. Press "browse" button and point to the directory where the firmware you
want to upload is kept and press "Upload" button
e. It will prompt you the firmware is upload successful and ZyAIR G-5100
will reboot.
5. How do I upgrade/backup the ZyNOS firmware by using TFTP client
program via LAN?
The ZyAIR G-5100 allows you to transfer the firmware from/to ZyAIR G-5100
by using TFTP program via LAN. The procedure for uploading ZyNOS via
TFTP, FTP is as follows.
a. Use the TELNET client program in your PC to login to your Prestige.
