ZyXEL Communications ZyAIR G-2000 Plus, Руководство пользователя

Страница: 90 / 430

ZyAIR G-2000 Plus User’s Guide
89 Chapter 7 Wireless Security
Figure 29 Wireless: No Security
The following table describes the labels in this screen.
Table 22 Wireless No Security
LABEL DESCRIPTION
Security Choose from one of the security features listed in the drop-down box.
•
No Security
• Static WEP
• WPA-PSK
• WPA
• 802.1x + Dynamic WEP
• 802.1x + Static WEP
• 802.1x + No WEP
Enable
Breathing LED
Select this check box to enable the Breathing LED, also known as the ZyAIR LED.
The blue ZyAIR LED is on when the ZyAIR is on and blinks (or breaths) when data is
being transmitted to/from its wireless stations.
Clear the check box to turn this LED off even when the ZyAIR is on and data is being
transmitted/received.
Preamble Select a preamble type from the drop-down list menu. Choices are Long , Short and
Dynamic .
See the section on preamble for more information.
802.11 Mode Select 802.11b Only to allow only IEEE 802.11b compliant WLAN devices to
associate with the ZyAIR.
Select
802.11g Only to allow only IEEE 802.11g compliant WLAN devices to
associate with the ZyAIR.
Select
Mixed to allow either IEEE802.11b or IEEE802.11g compliant WLAN devices
to associate with the ZyAIR. The transmission rate of your ZyAIR might be reduced.
Apply Click Apply to save your changes back to the ZyAIR.
Reset Click Reset to reload the previous configuration for this screen.