ZyXEL Communications XS3800-28, Руководство пользователя, Страница: 676 / 789

Chapter 87 MAINTENANCE
XS3800-28 User’s Guide
676
To access this screen, click MAINTENANCE > Configuration > Erase Running Configuration in the
navigation panel.
1
In the Erase Running Configuration screen, click the Erase button to clear all Switch configuration
information you configured and return to the Zyxel default configuration settings.
Figure 538 MAINTENANCE > Configuration > Erase Running Configuration
2
Click YES to remove the running configuration on the Switch.
Figure 539 Erase Running Configuration: Confirmation
3
In the Web Configurator, click the Save button in the top of the screen to make the changes take
effect. If you want to access the Switch Web Configurator again, you may need to change the IP
address of your computer to be in the same subnet as that of the default Switch IP address (192.168.1.1
or DHCP-assigned IP).
87.12 Save Configuration
To access this screen, click MAINTENANCE > Configuration > Save Configuration in the navigation panel.
Click Config 1 to save the current configuration settings permanently to Configuration 1 on the Switch.
These configurations are set up according to your network environment.
Click Config 2 to save the current configuration settings permanently to Configuration 2 on the Switch.
These configurations are set up according to your network environment.
Click Custom Default to save the current configuration settings permanently to a customized default file
on the Switch. If configuration changes cause the Switch to behave abnormally, click Custom Default
(in the MAINTENANCE > Reboot System screen) to have the Switch automatically reboot and restore the
saved Custom Default configuration file.
Figure 540 MAINTENANCE > Configuration > Save Configuration
Note: If a customized default file was not saved, clicking Custom Default in the MAINTENANCE
> Reboot System screen loads the factory default configuration on the Switch.