ZyXEL Communications XS3800-28, Руководство пользователя, Страница: 664 / 789

Chapter 87 MAINTENANCE
XS3800-28 User’s Guide
664
Click MAINTENANCE > Certificates to open the following screen. Use this screen to import the Switch's
CA-signed certificates.
Figure 526 MAINTENANCE > Certificates
The following table describes the labels in this screen.
Table 356 MAINTENANCE > Certificates
LABEL DESCRIPTION
File Path Click Choose File or Browse to find the certificate file you want to upload.
Password Enter the certificate file’s password that was created when the PKCS #12 file was exported.
The password consists of up to 32 printable ASCII characters except [ ? ], [ | ], [ ' ], [ " ] or [ ,
].
Import Click this button to save the certificate that you have enrolled from a certification authority
from your computer to the Switch.
Synchronize
Certificate
Note: This part only appears in Stacking mode.
Active Enable this option to allow the master Switch in Stacking mode to synchronize CA-signed
certificates to all stacking members and save it to their non-volatile memory.
Or, delete the stacking members’ CA-signed certificate if a CA-signed certificate does not
exist in the master Switch.
Otherwise, disable this option.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Service This field displays the service type that this certificate is for.
Subject This field displays identifying information about the certificate’s owner, such as CN
(Common Name), OU (Organizational Unit or department), O (Organization or company)
and C (Country). It is recommended that each certificate have unique subject
information.
Issuer This field displays identifying information about the certificate’s issuing certification
authority, such as a common name, organizational unit or department, organization or
company and country.
Valid From This field displays the date that the certificate becomes applicable.
Valid To This field displays the date that the certificate expires.