manualshive.com logo in svg

ZyXEL Communications XS3800-28, Руководство пользователя, Страница: 446 / 789

Поделиться
Скачать
ZyXEL Communications XS3800-28 Скачать руководство пользователя страница 446

Chapter 59 VLAN Mapping

XS3800-28 User’s Guide

446

Figure 342   

SWITCHING > VLAN Mapping > VLAN Mapping (Stacking Mode)

The following table describes the labels in this screen.

59.3  VLAN Mapping Setup

Click the 

SWITCHING

 > 

VLAN Mapping

 > 

VLAN Mapping Setup 

to display the screen as shown. Use this 

screen to view and configure the VLAN mapping rules.

Table 219   SWITCHING > VLAN Mapping > VLAN Mapping

LABEL

DESCRIPTION

Active

Enable the switch button to enable VLAN mapping on the Switch.

SLOT

This field appears only in Stacking mode. Click the drop-down list to choose the slot number of 
the Switch in a stack.

Port

This field displays the port number. In Stacking mode, the first number represents the slot ID and 
the second is the port number. Please note that the default stacking ports (the last four ports of 
your Switch) cannot be configured. They are reserved for stacking only.

*

Settings in this row apply to all ports.

Use this row only if you want to make some settings the same for all ports. Use this row first to set 
the common settings and then make adjustments on a port-by-port basis.

Note: Changes in this row are copied to all the ports as soon as you make them.

Active

Select this check box to enable the VLAN mapping feature on this port. Clear this check box to 
disable the VLAN mapping feature.

Apply

Click 

Apply

 to save your changes to the Switch’s run-time memory. The Switch loses these 

changes if it is turned off or loses power, so use the 

Save

 link on the top navigation panel to save 

your changes to the non-volatile memory when you are done configuring.

Cancel

Click 

Cancel

 to begin configuring this screen afresh.

Содержание XS3800-28






















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов