ZyXEL Communications XS3800-28, Руководство пользователя, Страница: 36 / 789

Chapter 1 Getting to Know Your Switch
XS3800-28 User’s Guide
36
firmware version for the Switch where 4.70 is the firmware trunk version, ABML identifies the Switch and .0
is the first release of trunk version 4.70.
1.1.7 Web Configurator Networked AV Mode
Aside from the Web Configurator in Standard mode, you can switch to Networked AV mode that is
specifically designed to simplify configuration and management of the Switch for AVoIP (Audio-Video
over Internet Protocol) application. In AV over IP, the AV transmitter is the transmitter, the AV receiver is
the receiver, and the matrix switch is a standard IP Switch. See
Section 4.4 on page 64 for details on
using the Setup Wizard screen for configuring the Switch’s Networked AV mode’s basic and advanced
settings.
Figure 4 Comparison Between Traditional AV and AVoIP Setups
1.2 Example Applications
This section shows a few examples of using the Switch in various network environments. Note that the
Switch in the figure is just an example Switch and not your actual Switch.
1.2.1 Backbone Example Application
The Switch is an ideal solution for small networks where rapid growth can be expected in the near future.
The Switch can be used standalone for a group of heavy traffic users. You can connect computers and
servers directly to the Switch’s port or connect other switches to the Switch.
In this example, all computers can share high-speed applications on the server. To expand the network,
simply add more networking devices such as switches, routers, computers, print servers, and so on.
Table 4 Models and Firmware Version
SWITCH MODEL FIRMWARE VERSION
XS3800-28 4.70(ABML.0) and later