ZyXEL Communications XS3800-28, Руководство пользователя, Страница: 155 / 789

Chapter 22 Interface Setup
XS3800-28 User’s Guide
155
C
HAPTER
22
Interface Setup
22.1 Interface Setup Overview
This chapter shows you how to create virtual interfaces for interface-based configurations. An IPv6
address is configured on a per-interface basis. The interface can be a physical interface (for example,
an Ethernet port) or a virtual interface (for example, a VLAN).
22.2 Interface Setup
Use this screen to view and create IPv4 loopback interfaces for routing protocols, or create IPv6
interfaces for VLANs on which you can configure an IPv6 address to access and manage the Switch.
The interfaces you create here will only take effect after you configure them in:
• the NETWORKING > Loopback Interface > IPv4 Loopback Interface screen, or
• the SYSTEM > IPv6 screens.
Click SYSTEM > Interface Setup in the navigation panel to display the configuration screen.
Figure 98 SYSTEM > Interface Setup
The following table describes the labels in this screen.
Table 42 SYSTEM > Interface Setup
LABEL DESCRIPTION
Index This field displays the index number of an entry.
Interface Type This field displays the type of interface.
Interface ID This field displays the identification number of the interface.
Interface This field displays the interface’s descriptive name which is generated automatically by the
Switch. The name is from a combination of the interface type and ID number.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.